Jvc MX-V508T User Manual download pdf (Page 38)

English

Setting the Timer

On the Remote Control

1. Press and hold the SHIFT button until

the following procedure is finished.

2. Press the TIMER button.

3. Press the SELECT (+) or (–) to set the

On Time.

4. Press the SET button.

5. Press the SELECT (+) or (–) to set the

Off Time.

6. Press the SET button.

7. Press the SELECT (+) or (–) to select

the source.

8. Press the SET button.

9. Press the SELECT (+) or (–) to set the

volume level.

10. Press the SET button.

11. Release the SHIFT button. Setting com-

pleted.

12. Turn the Unit Off to activate the Timer

function.

13. If you want to remove the timer settings

you have set, press the TIMER button

while pressing the SHIFT button.

Remote Control

Steps

Explanation/Remarks

1. Step 2: The Timer indicator on the display lights up.

The blinking “TIMER ON” changes to the On Time

setting display.

2. Step 3: Pressing the SELECT (+) or (–) button will

advance or decrease the time. Pressing continuously will

make the time increases or decreases in 10 minute in-

tervals.

3. Step 4: “TIMER OFF” blinks on the display and the

display changes to the Off Time setting display.

4. Step 5: This will help you to set to the time you want

the Unit to be turned off.

5. Step 6: The name of the source blinks.

6. Step 7: The display changes as below with each press

of the button.

= TUNER

=TUNER

REC

= CD

= TAPE

TUNER : Selects the last station you were listen-

ing to.

TUNER REC : Records the last station you were listen-

ing to.

CD : Plays the last CD you were listening to.

TAPE : Plays the last tape you were listening to.

• In the source TUNER, CD or TAPE the timer is a Daily

timer. It will activated every day until the setting is turned

off.

• In the source TUNER

REC, the timer is a Once timer. Af-

ter the Once timer has been executed, the details of the

setting remain stored but the Timer status is set to off.

7. Step 8 : The volume level blinks on the display.

9. Step 10 : The display returns to the display before you

set the timer.

10. Step 11: Setting completed.

11. Step 12 : The timer will activate as set after you off the

Unit. Before turning off, check that the selected source

is ready. If you will be recording a source while you are

out, set the volume to 0. Remember to place a tape in

Deck B if you intend to record from the tuner (TUNER

REC)

8. Step 9 : Set to the volume you want.

EN31-44;MX-V508T[U]/1 98.6.5, 9:57 AM34

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Comments to this Manuals

No comments

Jvc MX-V508T User Manual Page 38

Comments to this Manuals

Related products and manuals for Acoustics Jvc MX-V508T