Jvc CA-MXS6MD User Manual download pdf (Page 67)

– 64 –

English

Push the joy control downward ( ) — or upward

(

) — to select the source name.

• When the source is the external equipment connected

to the LINE 1 jacks:

You can select from “LINE1” (Initial setting),

“TAPE,” “DBS,” “VCR,” “TV,” and “GAME.”

•

When the source is the equipment connected to the

LINE 2 jack:

You can select from “LINE2” (Initial setting) and

“P-MD” (portable MD player).

•

When the source is the equipment connected to the

DIGITAL IN terminal:

You can select from “DIGITAL IN” (Initial setting)

and “DBS-DIGITAL.”

Press SET to finish the setting.

Auto Power Off Setting

Auto Power Off function automatically turns off the unit if

no sound comes in for more than 3 minutes.

If any operation is done during this 3-minute period, Auto

Power Off function is canceled temporarily even though no

sound comes in.

Press MENU.

The menu screen appears in the main display.

• If the unit is turned off, you cannot go to the next

step.

Push the joy control downward ( ) to select

“A.P.off (current setting*).”

* The current setting will appear following “A.P.off.”

Push the joy control rightward ( ) or leftward ( )

to select either “SET” or “CANCEL.”

SET : Activates the Auto Power Off function.

CANCEL : Cancels the Auto Power Off function.

Press SET to finish the setting.

When Auto Power Off function is activated, the A.P.off

indicator lights on the display.

The A.P.off indicator starts flashing if no sound comes

in.

When the remaining time until the shut-off time

becomes 20 seconds, it will be shown in the main

display.

Push the joy control downward ( ) — or upward

(

) — to select the input level

• When the source is the equipment connected to the

LINE 1 jacks:

Level 1 : Select when the recorded sound is not loud

enough. This setting increases the input

signal level. (Initial setting when shipped

from the factory)

Level 2: Select when the recorded sound is distorted.

This setting reduces the input signal level.

• When the source is the equipment connected to the

LINE 2 jack:

Level 1 : Initial setting when shipped from the

factory

Level 2: Select when the recorded sound is distorted

with “Level 1” selected.

Level 3: Select when the recorded sound is still

distorted with “Level 2” selected.

Level 4: Select when the recorded sound is still

distorted with “Level 3” selected.

• If “Level OVER!” still appears even after

setting the input level to “Level 4,” reconnect

the equipment to the LINE 1 jacks, and set the

input level to “Level 2.”

Press SET to finish the setting.

Changing the source name

You can change the external source names (LINE1, LINE2,

and DIGITAL IN) to the actual component names.

• You cannot change the external source names while

recording its sound on an MD.

Press MENU.

The menu screen appears in the main display.

• If the current source is not the external equipment

connected, you cannot go to the next step.

Push the joy control downward ( ) to select

“NAME CHANGE,” then press SET.

Ex. When the source is the external equipment

connected to the LINE 1 jacks

EN58-64.CA-MXS6MD[US/UB]/f 00.10.10, 9:56 AM64

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 73 74 75

Comments to this Manuals

No comments

Jvc CA-MXS6MD User Manual Page 67

Comments to this Manuals

Related products and manuals for Acoustics Jvc CA-MXS6MD