JVC VN-H237U User Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
58
Internet Explorer Setting
Tampering Detection Pages
This page sets the tampering detection.
This page can be used during access using "admin" or "operator".
Memo:
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to its previous value. When
you press the [Cancel] button, other entries that you changed will also be restored to their previous
values.
When the Built-in Viewer or another client is acquiring images from the camera and the camera's
transfer capabilities are exceeded, video may not be displayed on the [Tampering Detection] page.
When using the [Tampering Detection] page, disable the Built-in Viewer and other clients.
Note:
Detection may not be possible due to the installation conditions of the camera or the subject being shot.
When [Motion Detection] or [Audio Detection] is set to AONB, the tampering detection function
cannot be used.
* The [Set values] in bold letters are factory defaults.
Settings (continued)
Click [Advanced Settings] and [Tampering Detection].
A Inspection
screen
When tampering is detected, the area around the viewer becomes
accentuated in red.
Tampering detection is triggered when the video brightness data becomes
focused on a single value. This may take place when the lens has been
blocked, or an obstacle is placed in front of the camera.
B Tampering
Detection
Turns tampering detection ON or OFF.
[Set values: ON, OFF]
C Level Sets the tampering detection level.
Larger numbers will increase the detection level, making it more sensitive.
[Set values: 0 to 4 to 10]
D Detection Time Sets the minimum time for detecting tampering.
If video determined to be tampering continues for longer than the specified
time, tampering detection is triggered.
[Set values: 5 to 50 to 100] sec
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 127 128

Comments to this Manuals

No comments