JVC CX-7000 Series User Manual download pdf (Page 38)

Press B

A [Cleaning..] message appears.

Cautions:

If the retransfer heating roller is hot, a [HR is too hot!] message will

be displayed. Turn off the power, and perform cleaning after the

retransfer heating roller has cooled down completely.

Insert the cleaning card (sold separately) within 20 seconds

The roller draws in the card, and cleaning starts automatically.

A [Cleaning Start OK?] message appears after the card is

discharged.

Cautions:

Insert the card within 20 seconds after pressing B.

After pressing B, the buzzer sounds upon a lapse of 20 seconds,

and a [Jam(Hopper)] error message appears about 10 seconds later.

Press KNB to cancel the error.

When a standard-sized card is inserted, the card is automatically

discharged from the NG card outlet, and a [Cleaning Start OK?]

message appears.

Press B, and insert the cleaning card again

Reverse the adhesive face, and insert the card.

After the cleaning card is discharged, turn off the power, install the

retransfer film cassette, close the printer door, and install the card

hopper

To turn on the power again, do so after an interval of at least 10 seconds.

Maintenance

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 123 124

No comments

JVC CX-7000 Series User Manual Page 38