JVC HR-S7600EK User Manual download pdf (Page 19)

ENTER PRESET POSITION

Press TV PROG +/– to

enter the preset position

corresponding to the

broadcasting station you

wish to record.

SET TAPE SPEED

Press SP/LP ( ) to set the tape speed.

SET PDC MODE

Press PDC to select "ON" or "OFF".

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/

PDC" is not lit on the display panel, PDC is set to OFF.

Z "PDC Recording" in the right column.

● VPS (Video Programme System) recording is not

currently available in the U.K. and not possible with

this recorder.

RETURN TO NORMAL

SCREEN

After confirming all information is correct, press PROG

or OK. "PROGRAM COMPLETED" appears on the

screen for about 5 seconds, then normal screen

appears.

● Repeat steps 1 – 9 for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

Press ‰ (TIMER). The recorder turns off automatically

and ‰ appears on the display panel.

● To disengage the timer, press ‰ (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 9, press WEEKLY (NUMBER

key “9”) for weekly serials or DAILY (NUMBER key “8”) for

daily serials (Monday – Friday). Either "WEEKLY" or "DAILY"

appears on the screen. Pressing the button again makes the

corresponding indication disappear.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer

Programming:

1 Set "AV2 SELECT" to the appropriate mode. (Z pg. 37)

2 Perform steps 1 – 10. Enter "L-2" for the preset position

in step 6.

3 Set the satellite receiver to the appropriate channel

before the selected programme begins.

4 Leave the satellite receiver's power on.

NOTE:

You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen and "FULL" appears

on the front display panel. To record the extra programme, you

must first cancel any unnecessary programmes (

pg. 20).

Now available from some TV stations, PDC (Programme

Delivery Control) is a service designed to assure safe,

accurate timer recording. With this system, special code

signals are transmitted together with the audio/video

signals. These code signals control your video recorder and

have precedence over the advertised times which you may

have preset into the timer. This means that your recorder

will start and stop recording when the preset TV

programmes actually start and end — even if the broadcast

time of a preset TV programme is changed from what has

been advertised. PDC is currently available nationally on

BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay

transmitters. Ch.3 operates a PDC service in most areas.

All channels intend to offer this service in due course.

Check your TV programme listing guide for latest informa-

tion. If the channel you intend to record does not offer a

PDC service your recorder will not start recording if PDC

has been selected. Be sure to set PDC to "OFF" if PDC is

not available on your selected channel.

(Z step 8 in the left column).

NOTES:

●

Set the start time (PDC time) exactly as advertised in the

TV listing. A different time than advertised will result in

no recording.

●

PDC recording is also possible when a satellite receiver

or a cable system is connected to AV2 IN/DECODER on

your recorder.

●

PDC recording is also possible via the AV1 IN/OUT

connector.

PDC Recording

Timer Warning

If you have programmed your

recorder to timer-record a

programme or a series of

programmes, a warning

appears on the screen to tell

you that the recording is due

to start in 5 minutes.

NOTES:

●

The warning only appears if you’re not in the Timer

mode at the time.

●

If this recorder is being used as the player for tape

dubbing, the warning screen will be recorded on the

tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to

the start of timer recording. To clear the display, press .

– P1 –

START STOP

21:00 = 22:00

SP VPS/PDC OFF

DATE TV PROG

25.12 1

BBC 1

[+/–] =

[PROG] : EXIT

– WARNING–

TIMER RECORDING

TO START SOON

[ ]

1 ... 18 19 20 ... 64

Comments to this Manuals

No comments

JVC HR-S7600EK User Manual Page 19

Comments to this Manuals

Related products and manuals for Cassette players JVC HR-S7600EK