Jvc KD-AVX2 User Manual download pdf (Page 39)

ENGLISH

Indications Selectable settings, [reference page]

Disc Setup 2

Speaker Level*

You can adjust the output level of each speaker monitoring

the test tone.

Press and hold ENT to activate (or cancel) the test tone.

• Front Lch/Center ch/Front Rch/Rear Rch/

Subwoofer*

/Rear Lch: adjust the output level of each

speaker in the range of –10dB –+10dB. [Initial]; 00dB

Speaker Distance*

You can adjust the speaker output timing separately for each

speaker according to the distance from the speakers to the

listening position.

• Front Lch/Center ch/Front Rch/Rear Rch/Rear Lch:

adjust the speaker distance in the range of 15 cm to 600 cm

in 15-cm step.

[Initial]; 120 cm (for center speaker), 150 cm (for the other

speakers)

When activating the test tone, white noise comes out and cycles between the speakers activated on

“Speaker Size” [38] for about 2 seconds each. Press 5 / ∞ repeatedly while the test tone comes out

from the target speaker to adjust the settings (the test tone continues to come out from the target

speaker during the adjustment).

The setting is effective only when a multi-channel source is played back and Disc Surround is on, or

when Dolby PLII Movie/Music is in effect. Adjust the level on “Subwoofer” [43] for other cases.

Selectable only when DISC is the source.

Unselectable when all the speakers other than front ones are deactivated on “Speaker Size” [38].

Adjusts the speaker level

Selects the speaker to adjust

Adjusts the speaker distance

Selects the speaker to adjust

AVX2EE.indb 39AVX2EE.indb 39 06.2.9 1:10:12 PM06.2.9 1:10:12 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 134 135

No comments

Jvc KD-AVX2 User Manual Page 39