JVC KD-R426 User Manual download pdf (Page 19)

19ENGLISH

Specifications

USB SECTION

USB Standard :

USB 1.1, USB 2.0

Data Transfer Rate (Full Speed) :

Max. 12 Mbps

Compatible Device :

Mass Storage Class

Compatible File System :

FAT 32/16/12

Playable Audio Format :

MP3/WMA

Max. Current :

DC 5 V 500 mA

GENERAL

Power Requirement :

Operating Voltage :

DC 14.4 V (11 V to 16 V allowance)

Grounding System :

Negative ground

Allowable Operating Temperature :

0°C to +40°C

Dimensions (W × H × D) : (approx.)

– Installation Size :

182 mm × 52 mm × 159 mm

– Panel Size :

188 mm × 59 mm × 9 mm

Mass :

1.2 kg (excluding accessories)

Subject to change without notice.

AUDIO AMPLIFIER SECTION

Maximum Power Output :

50 W per channel

Continuous Power Output (RMS) :

20 W per

channel into 4 Ω, 40 Hz to 20 000 Hz at no

more than 1% total harmonic distortion.

Signal-to-Noise Ratio :

70 dB

Load Impedance :

4 Ω (4 Ω to 8 Ω allowance)

Frequency Response :

40 Hz to 20 000 Hz

Line-Out or Subwoofer-Out Level/

Impedance :

2.5 V/20 kΩ load (full scale)

Output Impedance :

1 kΩ

Other Terminal :

USB input terminal, Front

auxiliary input jack, Rear auxiliary/Bluetooth

adapter input jack, Antenna terminal

TUNER SECTION

Frequency Range :

FM :

87.5 MHz to 108.0 MHz

AM :

531 kHz to 1 611 kHz

FM Tuner :

Usable Sensitivity :

9.3 dBf (0.8 μV/75 Ω)

50 dB Quieting Sensitivity :

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz) :

65 dB

Frequency Response :

40 Hz to 15 000 Hz

Stereo Separation:

40 dB

AM Tuner :

Sensitivity/Selectivity :

20 μV/40 dB

CD PLAYER SECTION

Type :

Compact disc player

Signal Detection System :

Non-contact optical

pickup (semiconductor laser)

Number of Channels :

2 channels (stereo)

Frequency Response :

5 Hz to 20 000 Hz

Signal-to-Noise Ratio :

98 dB

Wow and Flutter :

Less than measurable limit

MP3 Decoding Format (MPEG1/2 Audio

Layer 3) :

Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding

Format :

Max. Bit Rate: 192 kbps

Microsoft and Windows Media are either

registered trademarks or trademarks of

Microsoft Corporation in the United States

and/or other countries.

KD-R526:

• “Made for iPod,” and “Made for iPhone”

mean that an electronic accessory has

been designed to connect specifically

to iPod, or iPhone, respectively, and has

been certified by the developer to meet

Apple performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this

accessory with iPod, or iPhone may affect

wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and

iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

EN02-19_KD-R526_005A_4.indd 19EN02-19_KD-R526_005A_4.indd 19 10/6/10 3:11:35 PM10/6/10 3:11:35 PM

1 ... 18 19 20 21 22

Comments to this Manuals

No comments