Jvc KS-FX12WT User Manual download pdf (Page 8)

ENGLISH

Scanning broadcast stations

When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a

broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes

on the display), and you can check what program is now being broadcast.

If you want to listen to that program, press the same button again to stop scanning.

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:

Press MO/RND while listening to an FM stereo broadcast. The sound you hear becomes

monaural but reception will be improved.

To restore the stereo effect, press the same button again.

Changing the AM/FM channel intervals

When using this unit in an area other than North or South America:

When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and

200 kHz for FM. You can change the channel intervals by following the procedure below.

1 Press SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M” or “AREA” appears on the display.

2 If “AREA” does not appear, press

T or S until it appears.

3 Press +.

“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for

manual tuning) / 100 kHz (for searching) for FM.

To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA

US” appears on the display.)

AREA EU: Select this when used in an area other than North and South America.

AREA US: Select this when used in North or South America.

Other convenient tuner functions

SEL

MO/RND

RPT/SCAN

Lights when receiving an FM broadcast in stereo

+/–

EN04-08.KS-FX12[J]/f 10/27/99, 10:19 AM8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

No comments

Jvc KS-FX12WT User Manual Page 8