Jvc HM-DH30000U User Manual Page 69
- Page / 84
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
EN
69
This Remote is capable of transmitting two control
codes; one set to respond to A code control signals and
another set to respond to B code control signals.
This Remote control is preset to send A code signals
because your VCR is initially set to respond to A code
signals. You can easily modify your VCR and the Remote
to respond to B code signals.
When using two JVC VCRs, set two VCRs and their
Remotes to different codes, so that you can operate these
VCRs separately.
1
Set remote operation mode
Set the VCR/TV/CABLE/DBS selector to “VCR”.
2
Set remote control code for Remote
1 Press and hold A/B.
2 Press the Number key “2”.
3 Press STOP ( 7 ), and release A/B.
3
Turn off VCR
Press POWER on the VCR.
4
Check remote control code for VCR
Press PLAY (3) on the VCR for more than 5
seconds.
● The code currently set appears on the front
display panel.
5
Turn on VCR
Press POWER on the Remote.
● The code transmitted from the Remote blinks
for a few seconds on the front display panel.
● After the code disappears on the front display
panel, make sure that the VCR is turned on by
pressing POWER on the Remote.
● To set the Remote and the VCR back to A code
control signals, repeat the same procedure as
shown above except pressing the Number key
“1” in step 2.
To control two VCRs with the same Remote
You can control two JVC VCRs by switching the remote
control code for the Remote between A and B
(Z␣ step␣ 2), keeping two VCRs to different control codes.
● Press the Number key “1” for A code control signals
and the Number key “2” for B code control signals. (To
change only the remote control code for the Remote,
DO NOT perform steps 3 to 5.)
Changing
Remote Control
Code
(Ex.) To set Remote to B code:
Press in succession
Hold
down
Release
STOP
ABC
A/B
2
123
456
7
89
0
VCR TV CABLE/DBS
2 –1, 3
5
2
2 –3
2 –2
NOTE:
When "POWER SAVE MODE" is set to "ON" , you can not
change the remote control code. Before changing the code, set
"POWER SAVE MODE" to "OFF" (
Z
pg. 56).
- INSTRUCTIONS 1
- CAUTIONS 2
- IMPORTANT PRODUCT 3
- SAFETY INSTRUCTIONS 3
- PORTABLE CART WARNING 4
- (Symbol provided by RETAC) 4
- ABOUT HEAD CLEANING 5
- CONTENTS 6
- Connections 7
- S-VIDEO Connection 8
- Component Video Connection 8
- Plug & Play 9
- Clock Setting 10
- Set Auto Clock to ON 11
- Select host channel 11
- Select D.S.T. mode 11
- Select time zone 11
- Return to normal screen 11
- INITIAL SETTINGS (cont.) 12
- Tuner Setting 13
- Cable Box 15
- Enter cable box brand 17
- DBS Receiver 18
- Control Setting 18
- Setting DBS receiver output 19
- Playback 21
- Features 22
- 1 Activate manual tracking 23
- 1 Start search 24
- 2 Access distant code 24
- Adjusting picture condition 25
- Locating beginning of timer 25
- Skipping unwanted portions 25
- Recording 26
- S-VHS/VHS Recording 27
- Watching one program while 29
- Showing on-screen display 29
- Recording on VHS tapes with 29
- S-VHS quality — Super VHS ET 29
- Accidental erasure prevention 30
- Special Effect 31
- 1 Pause during playback 32
- Viewing slow motion picture 33
- VCR Plus+ 34
- Programing 34
- Check program date 35
- Set tape speed 35
- Changing 36
- (Ex.) When inputting the 37
- (Ex.) If WNJU(Ind.) is 37
- Express Timer 38
- TIMER RECORDING (cont.) 40
- ATTENTION 41
- Navigation 42
- 1 Access Main Menu screen 43
- 3 Deactivate Video Navigation 43
- 4 Return to normal screen 43
- Finding Tapes 44
- Finding by recording date 45
- Finding by category 45
- VIDEO NAVIGATION (cont.) 46
- Editing Titles 47
- Entering or Editing program 49
- Editing program category 49
- Deleting program information 51
- Checking memory 51
- Useful Function 52
- Settings 52
- Video settings [VIDEO (VHS)] 53
- Audio settings [AUDIO] 54
- ATTENTION: 55
- Additional settings [ADDTL] 56
- PRE-RECORDED CC 57
- Access Main Menu screen 58
- Access i.LINK Set Up screen 58
- Confirm LINC setting 58
- Reset Number 58
- Set Number again 58
- What is “i.LINK?” 59
- Satellite Auto 60
- JLIP ID Number 61
- Edit From 62
- Camcorder 62
- S-VHS/VHS connection 63
- DV connection 63
- Edit To Or 64
- From Another 64
- VCR/Other 64
- Load cassettes 65
- Select edit mode 65
- Start playback 65
- Start recording 65
- TV Brand 66
- Brand Setting 67
- Remote Control 69
- TROUBLESHOOTING 70
- CORRECTIVE ACTION 71
- POSSIBLE CAUSE 71
- TROUBLESHOOTING (cont.) 72
- Error Codes and Messages 73
- Questions and answers 74
- List of terms 75
- Front panel 76
- Z pg. 62 76
- Z pg. 78 76
- Rear panel 77
- INDEX (cont.) 78
- On-screen display 79
- SPECIFICATIONS 81
- JVC SERVICE & ENGINEERING 82
- COMPANY OF AMERICA 82
- 1 YR 90 DAYS 83
Related products and manuals for Voice Recorders Jvc HM-DH30000U
Voice Recorders Jvc KS-FX12WT User Manual
(21 pages)
(21 pages)
Voice Recorders Jvc KS-FX12 User Manual
(21 pages)
(21 pages)
Voice Recorders Jvc HR-J695U User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.909 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals