JVC DT-V1700CG User Manual

INSTRUCTIONSDT-V1700CGMULTI-FORMAT MONITORVOLUMESLOT 1ABDEGAUSSMENUBLUECHECKASPECTAREAMARKERUNDERSCANPULSECROSSCOLOROFFSLOT 2CDSLOT 3POWEREFINPUT SELE

10HOW TO USE “MAIN MENU”䡵 “MAIN MENU” ITEMSThe following items appear in MAIN MENU.ItemsFunctions Displays1 APERTURE CONTROL Compensates the frequency

111. APERTURE CONTROLCompensates the frequencycharacteristics of the inputvideo signal. Press the button to display the settingmenu illustrated on the

12Input Signal Format Standard Manualsetting setting(MANUAL)NTSC, PAL, 480/60i,ITU601480/60p, 576/50i, 575/50pITU709720/60p, 1080/50i, 1080/60i,ITU709

13HOW TO USE “SETUP MENU”䡵 “SETUP MENU” ITEMSItems Functions1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time.2 PICTURE

14HOW TO USE “SETUP MENU” (cont'd) <FUNCTION SETTING>COLOR SYSTEM :AUTORUSH DELAY TIME :STD.HOUR METER X100h :000 EXIT: MENU

15 <COLOR TEMP./BAL.>COLOR TEMP. :LOWBLUE DRIVE :000RED DRIVE :000 GREEN CUTOFF :000BLUE CUTOFF :000RED CUTOFF

16 <STATUS DISPLAY>STATUS DISPLAY :ON1080/1035 :1080 EXIT: MENU ADJUST:- + SELECT: <DISTORTION ADJ.>PINCUSHION :00PIN

17HOW TO USE EXTERNALCONTROL䡵 ABOUT EXTERNAL CONTROLThis multi-format monitor has two external control terminals. One is the MAKE terminal, which cont

18HOW TO USE EXTERNALCONTROL (cont.)䡵 HOW TO USE THE RS-232C TERMINALYou can control the monitor from your PC via the RS-232C terminal.For details on

19ProblemsNo power supplyNo picture withthe power onNo soundWrong colorUnnatural pictureShaking picturePoints to be checkedIs the power plug loosened

2Thank you for purchasing this JVC multi-format monitor. Before using it, read and followall instructions carefully to take full advantage of the moni

20ProblemsIrregular colorWrong pictureposition, wrongpicture sizeFront panelbuttons andknobs do notfunctionPoints to be checkedIs the monitor placed o

21SPECIFICATIONS䡲 Type : Multi-format monitor䡲 Picture Tube : 17" measured diagonally䡲 EffectiveScreen Size : Width : 13" (330 mm)Height : 9

22䡵 Compliant Signal Formats of Each Input CardInput Signals IF-C01PNG IF-C01COMG IF-C01SDGNTSC R ——PAL R ——Black-and-White (50 Hz/60 Hz) R ——480/60i

23SPECIFICATIONS (INPUT CARD: OPTIONAL)䡵 IF-C01COMG: COMPONENT/RGB INPUT CARDType : Component/RGB input card for multi-format monitorInputs/Outputs :

24Usage Precautions● The selected signal is output from the SWITCHED OUT terminal only when the monitor’s power is turned on.● The output signal from

3SAFETY PRECAUTIONS ...2CONTROLS AND FEATURES ...

4CONTROLS AND FEATURESFRONT VIEW<Front Panel>Tally lampLights when the tally control signal is ON. The tally controlsignal is input through the

5REAR/SIDE VIEW<Rear Panel>COLOR OFF button/lampPress the COLOR OFF button. The button lights and thescreen becomes monochrome. When the COLOR O

6Video input/output terminalsInput (IN) and output (OUT) terminals for component(color deference) or RGB signals.The IN and OUT terminals are bridge-c

7䡵 SDI INPUT CARD (OPTIONAL: IF-C01SDG)AUDIO 2AUDIO 1OUTINSWITCHEDOUTSDI 1SDI 2ININ1234Output terminal for a selected componentserial digital signalOu

8PREPARATION1. Turn off the Multi-Format Monitor’s mainpower and unplug the power cable fromthe AC outlet.2. Unscrew the screws and remove the slotcov

9BASIC MENU OPERATIONS(MAIN MENU, SETUP MENU)䡵 ABOUT MENU SCREENSThis monitor features a MAIN MENU (main menu screen) anda SETUP MENU (setup menu scre