Jvc HR-J449MS User Manual download pdf (Page 33)

Remote A/B Code Switching

The remote control is capable of controlling two JVC video

recorders independently; one set to respond to the remote

control’s A code control signals and another set to respond to B

code control signals. The remote control is preset to send A

code signals because your video recorder is initially set to

respond to A code signals. You can easily modify your video

recorder to respond to B code signals.

REMOVE POWER SUPPLY

Unplug the mains power cord from the mains outlet.

SET A/B CODE SWITCH

Set to B.

RE-SUPPLY POWER

Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

Press on the remote control. The recorder will now

only respond to B code signals.

NOTE:

Some TV sets may malfunction in response to the B mode. If

this happens, switch back to the A mode.

ACTIVATE SCENE FINDER

Press RECH. SEQ. The recorder starts forward search for

5 seconds and then fast-forwards 10 minutes on the

counter. This cycle is repeated until the end of the tape

is reached.

● To start Scene Finder in the reverse direction, press

RECH. SEQ. and then turn the RECH. VAR. ring to the

left (or press the remote's 2 button) within 2

seconds. This cycle is repeated until the beginning of

the tape.

● During Scene Finder, the following indications appear

on the display panel:

STOP SCENE FINDER

Press 5.

NOTES:

●

During Scene Finder search, you can also hear the tape

sound. During fast forward or rewind, you hear the current TV

sound instead.

●

Scene Finder does not function during Index Search.

This function helps you check contents of unlabeled recorded

tapes at the touch of a single button.

NOTE:

Scene Finder cannot be used when the recorder is in the Record

mode.

Scene Finder

10 minutes

on counter

323232

Search Search Search

5 seconds10 minutes

on counter

5 seconds 5 seconds

Next Function Memory

You can set your recorder's power to go off automatically after

the tape is fully rewound. Before starting, make sure the

recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press 2, then press

within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the

counter reads “0:00:00” (instead of at the beginning of the

tape), press M. COMPTEUR so that the “M” mark appears

before pressing

Counter Memory

Returns to the counter reading of “0:00:00” to conveniently find

a specific place on the tape automatically.

SET COUNTER MEMORY

Press 0000 during playback at a point you wish to

locate later. The counter reads “0:00:00”. Then press M.

COMPTEUR, and “M” appears in front of the counter

digits.

ACTIVATE COUNTER

MEMORY

When you wish to return to the designated point, press

5 and then 2 or 3.

● The tape rewinds or fast-forwards and stops at about

0:00:00 automatically.

● To cancel Counter Memory, press M. COMPTEUR

again.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Comments to this Manuals

No comments

Jvc HR-J449MS User Manual Page 33

Comments to this Manuals

Related products and manuals for Video recorders Jvc HR-J449MS