JVC WB-S681U User Manual download pdf (Page 6)

A Remove the top cover fixing screws.

B Rotate the top cover in anticlockwise

direction as shown on the right diagram.

C Lift up and remove the top cover.

Fall prevention wire

Top cover

fixing screw

Camera unit

Remove the top cover from

the camera unit.

Remove the fall prevention wire.

Remove the screws and the fall prevention wire

that is mounted on camera unit.

Remove the camera unit

from the arm section.

Remove the connection fixing screws. (x3)

 WB-S684U

is an outdoor model.

 WB-S684U

is exclusively used for VN-V686WPU and

TK-C686WPE (For Europe).

Wrench

(4 mm)

Arm section

Top cover

Connection

section

fixing screws

Camera unit

Pull out the cables and

fall prevention wire

from the arm section.

Pull out the cables without damaging them.

CAUTION

Notes on Installation

● Consult your dealer on the installation location.

● We will not be responsible for any accidents that occur as a result of flawed installation.

● Pay due attention to the installation location and method.

● If the location is not strong enough, reinforce with a reinforcing board and check for safety before installing.

WB-S684U Outdoor Pendant Mount

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

JVC WB-S681U User Manual Page 6