Jvc DLA-Z1 User Manual Page 76
- Page / 80
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Warning display
You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LIGHT” indicators. The
“STANDBY/ON”
indicator will light up or appear blinking according to the operation mode of the projector unit. (Please
refer to ““Operation mode display”P. 75”.)
The Warning mode is activated once the message is displayed. Projection is interrupted, and the cooling fan is turned
on for about 10 seconds.
The power cannot be turned on again while cooling is in progress. Check the following after cooling is complete.
Indicator Status (Solid/Blinking)
Blinking
Frequency
Description Check and Countermeasure
.
LIGHT
STANDBY/ON
WARNING
WARNING
(Red) (*) Mode
Display
x2 Cooling fan stopped abnormally
0
Check that nothing is blocking
the air inlets.
0
Check that the external
temperature is normal.
Countermeasure: Leave the unit
unoperated until it cools down.
After
that, turn on the power again.
x3 Internal temperature is abnormally
high
x4 External temperature is too high
.
LIGHT
STANDBY/ON
WARNING
N
N
NG
WA
LIGHT
Blinking
Simultaneously
(Red)
(Orange)
Mode
Display
x1 Abnormal circuit operation
x2
x3
x4
.
LIGHT
STANDBY/ON
WARNING
RN
WAR
ING
(Red)
(Orange)
Mode
Display
G
G
T
L
x1
x3
x4 When the safety switch is activated Request for repair at your
authorized dealer or a nearby
service center.
If the Warning mode is activated again, wait for the cooling fan to stop, followed by pulling out the power plug from the
outlet.
Request for repair at your authorized dealer or a nearby service center.
76
Others
- INSTRUCTIONS 1
- Safety Precautions 2
- IMPORTANT SAFEGUARDS 3
- POWER CONNECTION 5
- POWER CONNECTION 5
- (United Kingdom only) 5
- LASER APERTURE 7
- Contents 9
- Check the Accessories 10
- Optional Accessories 10
- Controls and Features 11
- Main Unit - Rear 12
- Main Unit - Input Terminals 13
- Remote Control 14
- Getting Started 15
- Loading the batteries 15
- Removing the batteries 15
- Installing the Projector 17
- Precautions during Mounting 18
- Adjusting the Position 20
- Connecting the Projector 21
- Viewing Videos 24
- Turn off the power 25
- SETTING MEMORY 26
- MODE 1 MODE 2 MODE 3 26
- Screen No 27
- Screen Adjust 27
- Viewing 3D Movies 29
- Adjusting 3D Movies 30
- Video Type 31
- Setting the Color Profile 32
- Adjust/Set 33
- Axis Position (Image) 34
- Fine-tuning the Image Quality 36
- Gamma Adjustment 39
- Reduction”"“Low Latency” 40
- Press the [C.M.D.] button 40
- Motion Enhance 41
- List of Menu Items 42
- Installation 43
- Display Setup 43
- Function 43
- Information 43
- Picture Adjust 44
- Color Profile 45
- Color Management 45
- Color Temp 45
- “Color Temp.” 45
- Input Signal 49
- Remote Code 59
- Hide Mode 59
- Maintenance 61
- Troubleshooting 62
- Video image does not appear 63
- 3D images do not appear 63
- External Control 67
- Command Format 68
- Remote Control Code 69
- Communications Example 70
- Specifications 71
- PC signal (HDMI) 74
- STANDBY/ON 75
- Warning display 76
- Dimensions 77
- D-ILA PROJECTOR 80
AEG Electrolux E3101-4-M EU R07 manuály
Uživatelské manuály a uživatelské příručky pro Příslušenství pro výrobu kávy AEG Electrolux E3101-4-M EU R07.
Poskytujeme 1 manuály pdf AEG Electrolux E3101-4-M EU R07 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals