Jvc SP-THD5F User Manual download pdf (Page 18)

4 Select an appropriate audio input according to

the audio connection. ( 9)

You can select the following settings for each source

(underlined items are the initial settings for each

source):

– “VIDEO1”: 5.1CH*

, COAX*

and OPT*

– “VIDEO2”: 2CH, COAX*

and OPT*

–“VIDEO”: 2CH and OPT

If your System is the TH-D70, make the audio input

setting for both “VIDEO1” and “VIDEO2.”

“AIN.1:” or “AIN.2:” appears for TH-D70, and “AIN.” for

TH-D50.

TH-D70 only: When the speaker position mode is set to

“S.SPK F,” “5.1CH” cannot be selected.

TH-D70 only: It is not possible to select the same audio

input setting for “VIDEO1” and “VIDEO2.” For example,

when “COAX” is assigned to “VIDEO1,” it cannot be

selected for “VIDEO2.”

Select the color system and scanning mode for

the sources “DVD” and “USB” according to the

type of TV and to connection method.

To use the progressive scanning mode, connect a

TV supporting progressive video signals to the HDMI

MONITOR OUT terminal or COMPONENT jacks.

(8)

1 Select “DVD” or “USB” as the source.

( 12)

3 Select an appropriate color system and

scanning mode, then confirm the selection.

You can get better picture quality in the progressive

scanning than in the interlaced scanning.

When the color system or scanning mode does not

correspond to that of the TV, the picture is not

displayed normally.

Selecting the color system and

scanning mode

2CH

For connection via the

AUDIO IN jacks

5.1CH

For connection via the

AUDIO MULTI IN jacks

COAX

For connection via the

COAXIAL jack

OPT

For connection via the

OPTICAL terminal

480

«Hold

Scanning mode

I: Interlaced

P: Progressive

Color system

NT: NTSC

PAL: PAL

The number of scanning lines

• When connecting the TV via the HDMI MONITOR

OUT terminal, the following items are selectable:

AUTO, NT 480P, NT 720P, NT 1080I, PAL 576P,

PAL 720P and PAL 1080I

– Normally select “AUTO.”

When “AUTO” is selected, the System

automatically emits the video signal to get the

best picture quality on your TV.

The HD indicator lights when the System is

emitting “720P” (NT/PAL) or “1080I” (NT/PAL)

video signals.

• When connecting the TV via COMPONENT jacks,

S-VIDEO or VIDEO jack, the following items are

selectable:

NT 480I, NT 480P, PAL 576I and PAL 576P

– When connecting the TV via the S-VIDEO or

VIDEO jack, selecting a progressive scanning

mode does not affect the picture.

If another TV is connected through the HDMI

MONITOR OUT terminal, you cannot change

the color system and scanning mode for the TV

connected through the COMPONENT jacks, S-

VIDEO or VIDEO jack.

Select Confirm

Sound and monitor settings

See page 13 for button

locations.

TH-D70D50[UJ].book Page 15 Friday, June 1, 2007 1:42 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 42 43

Comments to this Manuals

No comments

Jvc SP-THD5F User Manual Page 18

Comments to this Manuals

Related products and manuals for Home Theater Systems Jvc SP-THD5F