JVC BD-X200E User Manual download pdf (Page 88)

E-86

Setup Menu

DISC MENU Screen

The following table identifies and describes the parameters that may be set using the DISC MENU screen.

Top half : Appearance on monitor screen

Bottom half : Appearance on LCD display

[ ] : Default setting

Parameter Possible settings Description

FINALIZE [CANCEL]

EXECUTE

FINAL [CAN]

EXE

CANCEL DISC [CANCEL]

FINALIZATION EXECUTE

CAN FIN [CAN]

EXE

DISC ERASE [CANCEL]

(QUICK) EXECUTE

q ERASE [CAN]

EXE

DISC ERASE [CANCEL]

(FULL) EXECUTE

F ERASE [CAN]

EXE

This parameter indicates whether or not the recorded disc is to be finalized. If a disc

recorded using this DVD recorder is to be played on a DVD player, it must first be

finalized. Once finalizing has been carried out, no addition recordings can be made

on the disc.

CANCEL : Finalizing is not to be carried out.

EXECUTE : Finalizing is to be carried out.

It will be necessary to close all titles on a disc before it can be finalized.

*A maximum of 20 minutes will be required to complete finalizing.

Select whether to cancel the finalization of a finalized DVD-RW. To add a recording

to a finalized DVD-RW set to EXECUTE. A DVD-RW finalized on another machine

cannot be canceled.

CANCEL : Do not cancel the finalization.

EXECUTE : Cancel the finalization. The TOP MENU created during finalization is

deleted.

Select whether to do a quick erase on a DVD-RW (video mode). A quick erase only

deletes the DVD-RW disc control area. The time required is shorter than a full erase,

and the disc data is deleted.

CANCEL : Do not do a quick erase.

EXECUTE : Do a quick erase. The disc can be newly recorded from the beginning.

Select whether to carry out a full erase on a DVD-RW (video mode). All areas of a

DVD-RW disc are deleted. If a disc is to be used repeatedly delete using this item.

CANCEL : Do not do a full erase.

EXECUTE : Do a full erase. The disc can be newly recorded from the beginning.

This button is used to return to the Setup Menu screen.

INPUT SELECT MENU Screen

The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.

Top half : Appearance on monitor screen

Bottom half : Appearance on LCD display

[ ] : Default setting

Parameter Possible settings Description

INPUT SELECT [LINE]

Y/C

INPUT [LINE]

This parameter is used to select the audio and video input signals.

LINE : The composite video signal from the VIDEO LINE IN terminal and the analog

audio signals from the AUDIO IN terminals are to be used.

Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals

from the AUDIO IN terminals are to be used.

DV : The digital video and audio signals from the DV IN/OUT terminal are to be

used.

* The front-panel indicator corresponding to the type of input signal selected on this

screen will light up or start to flash.

Setting of this parameter will not be possible when REMOTE SELECT from the

REMOTE MENU screen has been set to DV(MASTER), DV(SLAVE), or

DV(TRIGGER). DV signals will be used for input at these times

This button is used to return to the Setup Menu screen.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 96 97

Comments to this Manuals

No comments

JVC BD-X200E User Manual Page 88

Comments to this Manuals

Related products and manuals for DVD players JVC BD-X200E