JVC HR-S9700EK User Manual download pdf (Page 15)

ATTENTION

● The operations by JOG dial/SHUTTLE ring do not

include TimeScan (Z pg. 40).

● In the high-speed search, still, slow-motion or frame-by-

frame playback mode,

● the picture will be distorted.

● noise bars will appear.

● there will be a loss of colour with a tape recorded in LP/

EP mode.

● Noise may appear or the picture may appear distorted

with an EP-recorded tape during still, slow-motion,

frame-by-frame playback or variable speed search.

● Picture may not appear during high-speed search with a

tape recorded in LP/EP mode.

● When normal playback resumes from search, still, slow

motion or frame-by-frame playback, the picture may

jitter vertically momentarily depending on the type of TV

being used.

Slow Motion

ACTIVATE SLOW-MOTION PLAY-

BACK

During playback or still picture, turn the SHUTTLE ring

to the right for forward slow motion, or to the left for

reverse slow motion (refer to the illustration on the left).

During still picture, press and hold PAUSE for 2

seconds, then release. Press and release again to return

to still picture.

During still picture, press and hold

. Release to

return to still picture.

To resume normal playback, press PLAY.

NOTES:

●

For Time Jog, see page 41.

●

Manual tracking is possible during slow motion playback.

(

pg. 32)

Still Picture/Frame-By-Frame

Playback

PAUSE DURING PLAYBACK

Press PAUSE.

● During still picture, the sound from the previous

3 seconds (approx.) will be played back repeatedly

(provided there was at least 6 seconds of normal

playback prior to engaging the still picture mode).

● "TIME SCAN AUDIO" must be set to "ON", or the

sound will not be heard. (Z pg. 41)

ACTIVATE FRAME-BY-FRAME

PLAYBACK

Turn the JOG dial to the right for forward frame-by-

frame playback, or to the left for reverse frame-by-frame

playback.

Press PAUSE. Each time PAUSE is pressed the tape will

advance one frame.

Press

. Each time one of these buttons is pressed

the tape will move one frame in the direction of the

arrow.

To resume normal playback, press PLAY.

NOTES:

•

Refer to the SHUTTLE ring illustration below as you read the

following procedures.

•

Reverse playback is possible only with a tape recorded in SP

mode.

Still

High-Speed (Turbo) Search

ACTIVATE HIGH-SPEED SEARCH

During playback or still, turn the SHUTTLE ring all the

way to the right for forward high-speed search, or to the

left for reverse high-speed search. Releasing SHUTTLE

resumes still picture playback.

During playback or still picture, press FF for forward

high-speed search, or REW for reverse high-speed

search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW during playback or

still picture. When released, normal playback resumes.

ACTIVATE VARIABLE-SPEED

During playback or still, turn the SHUTTLE ring to the

right for forward variable-speed search, or to the left for

reverse variable-speed search (refer to the illustration on

the left).

To resume normal playback, press PLAY.

NOTE:

Variable-speed search with TimeScan (

pg. 40) can be used

by pressing the remote control's

button.

Variable-Speed Search

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Comments to this Manuals

No comments

JVC HR-S9700EK User Manual Page 15

Comments to this Manuals

Related products and manuals for Cassette players JVC HR-S9700EK