JVC HR-S7965EK User Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
advanced features52
Editing Using Another VCR
connect up Connect the player’s 21-pin SCART connector to the recorder’s
21-pin SCART connector as illustrated.
A When using your VCR as the player ...
... connect its
AV1 (L-1) IN/OUT connector to another VCR.
B When using your VCR as the recorder ...
... connect its
AV2 (L-2) IN/DECODER or AV1 (L-1) IN/OUT connector to another
VCR.
If another VCR is compatible with Y/C signal ...
... When using your VCR as the player, set L-1 OUTPUT to S-VIDEO ( pg.48).
... When using your VCR as the recorder, set L-2 INPUT to S-VIDEO ( pg.49).
set vcr’s input mode The recording VCR mode must be set to AUX. If this
VCR is the recorder, press
AUX and/or PR to select L-1 (if you’ve used the AV2
(L-2) IN/DECODER
connector) or L-2 (if you’ve used the AV1 (L-1) IN/OUT
connector). If this VCR is the player, set O.S.D. to OFF. ( pg.55)
When using the
AV2 (L-2) IN/DECODER connector, set L-2 SELECT to the
appropriate mode. ( pg.51)
set edit mode See Picture Control on page33.
start source vcr Engage its PLAY mode.
start recording vcr Engage its RECORD mode.
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.
When you set
PICTURE CONTROL to EDIT to dub tapes ( pg.33), be sure to
select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the
tapes.
If you are using another VCR with S-Video and Audio input/output
connectors, you can connect those connectors to this VCR’s S-VIDEO IN/S
OUT and AUDIO IN/OUT connectors.
When using your VCR as the player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording
VCR’s S-Video and Audio input connectors.
When using your VCR as the recorder ...
... connect its front panel S-VIDEO and AUDIO input connectors to the
player’s S-Video and Audio output connectors. Then, set the VCR’s input
mode to S-1.
HR-S7965EK-EN/p31-54 4/19/03, 01:35 PM52
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Comments to this Manuals

No comments