JVC KD-SX875 User Manual download pdf (Page 25)

ENGLISH

Selecting the telephone muting

This mode is used when a cellular phone system is connected. Depending on the phone

system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from

this unit. When shipped from the factory, this mode is deactivated.

• MUTING 1: Select this if this setting can mute the sounds.

• MUTING 2: Select this if this setting can mute the sounds.

• OFF: Cancels the telephone muting.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears

on the display.

2 Select “TEL (Telephone)” with ¢

or 4 .

3 Select the desired mode with the control dial.

The telephone muting mode changes as follows:

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line

Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select

which component — CD changer or external component — to use. When shipped from the

factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer

• CHANGER: To use the CD changer

1. Change the source to FM, AM or CD with FM/AM or CD button.

2. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears

on the display.

3. Select “EXT IN” with ¢

or 4 .

4. Select the desired mode with the control dial.

The external component selecting mode changes as follows:

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/

Connection Manual (separate volume).

LINE IN CHANGER

MUTING 1 MUTING 2

OFF

EN20-25KD-SX975/SX875[U]f 18/1/01, 09:1425

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

JVC KD-SX875 User Manual Page 25