JVC KW-AVX900 User Manual download pdf (Page 60)

Equalizer

Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [51]

Sound

Menu items Selectable settings, [reference page]

Fader/Balance Adjust fader—speaker output balance between the front and rear speakers.

• Upmost—front only (F6)

• Downmost—rear only (R6)

When using a two-speaker system, set the fader to the center (0).

Adjust balance—speaker output balance between the left and right speakers.

• Leftmost—left only (L6)

• Rightmost—right only (R6)

Volume Adjust Adjust and store auto-adjustment volume level for each source, comparing to

the FM volume level. The volume level will automatically increase or decrease

when you change the source.

–12 to +12; Initial 00

• For Disc/SD/USB: An auto-adjustment level is commonly used when playing

DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files

Subwoofer Phase Select either <Normal> or <Reverse>, which reproduces a better sound.

Subwoofer Level*

Adjust the subwoofer output level. Level: –06 to +08; Initial 00

High Pass Filter Through: Select when the subwoofer is not connected.

On: Select when the subwoofer is connected.

Crossover Adjust the crossover frequency between the front/rear speakers and the

subwoofer.

80Hz, 120Hz, 150Hz

Amplifier Gain You can change the maximum volume level of this unit.

Off: Deactivates the built-in amplifier.

Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less

than 50 W)

High: VOL 00 to 50

Rear Speaker *

You can activate/deactivate the rear speakers.

Off, On

This subwoofer level setting takes effect only when surround is deactivated. (☞ also page 24)

This setting takes effect only when Dual Zone is activated. (☞ also page 27)

EN51-62_KW-AVX900A_f.indd 60EN51-62_KW-AVX900A_f.indd 60 07.3.13 11:41:26 AM07.3.13 11:41:26 AM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 81 82

No comments

JVC KW-AVX900 User Manual Page 60