JVC KW-ADV793 User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
35
ENGLISH
Menu item Selectable setting/item
Initial: Underlined
Fader/Balance
Fader/Balance
Reset
Fader 0
Balance 0
Back
Exit
Fader : Adjust the front and rear speaker output balance.
F6 to R6; Initial 0
When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
L6 to R6; Initial 0
Press [ 5//2/3 ] or drag [ ] to adjust.
To clear the adjustment, press [Reset].
Volume Adjust *
6
Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears if an FM broadcast is selected as the source.
–12 to +12; Initial 00
Subwoofer Level Adjust the subwoofer output level.
00 to 08; Initial 08
High Pass Filter
Through
On
: Select when the subwoofer is not connected.
: Select when the subwoofer is connected.
Low Pass Filter Select the crossover frequency between the front/rear speakers and the subwoofer.
55Hz, 85Hz, 120Hz
Amplifier Gain You can change the maximum volume level of this unit.
Off
Low
High
: Deactivates the built-in amplifier.
: VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
: VOL 00 to 50
If you change the setting from <High> to <Low> while the volume level is set
higher than “VOL 30, the unit automatically changes the volume level to “VOL
30.
Loudness You can activate/deactivate the loudness function.
Off
On
: Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
Rear Speaker *
7
You can activate/deactivate the rear speakers.
This setting takes effect only when Dual Zone is activated. ( 28)
Off
On
: Deactivate the rear speakers.
: Activate the rear speakers.
*
6
For “
DISC/USB
”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.
*
7
Only for KW-AVX838/KW-AVX830.
Sound
EN_KW-AVX838[J]001B.indb 35EN_KW-AVX838[J]001B.indb 35 10.5.6 2:21:28 PM10.5.6 2:21:28 PM
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 146 147

Comments to this Manuals

No comments