Jvc SR- DVM600U User Manual download pdf (Page 54)

Filename [DVM600US_11Editing.fm]

Masterpage:Left+

54 EN

EDITING

Page 54 Monday, 25 September 2006 13:54

This function allows you to record new audio, without erasing the

original audio, on a DV tape that was recorded with ADV AUDIO

RECB set to A12BITB (A pg. 60).

1 Connect an audio device to the unit’s [AUDIO] input connectors

on the front panel.

● When using a monaural audio device, connect its AUDIO OUT

connector to the [AUDIO-L] input connector on your unit.

2 Load a Mini DV cassette with the erase protection switch set to

ARECB.

3 Press DV/HDD/DVD on the unit repeatedly or DV on the remote

so that the DV lamp lights up on the unit.

4 Press INPUT SELECT +/– on the remote control or

INPUT SELECT on the unit to select AF-1B.

5 Start playback slightly before the actual point from where you

wish to start dubbing.

6 Press W to pause playback.

7 Press AUDIO DUB. to engage the audio dubbing mode.

● Your unit enters the Audio Dubbing Pause mode.

● To perform Audio Dubbing with audio mixing, press AUDIO to

select AL W X RB at this point. When using the DV deck as the

recording deck, also make sure that AAUDIO MODEB is set to

ASOUND1B (A pg. 60).

* Audio Dubbing with audio mixing is not possible if you are using a

monaural audio component, or if you don’t have an audio mixer.

8 Engage the audio device’s playback, then press I to start the

tape in the unit. Audio dubbing starts at this point.

● To stop dubbing temporarily, press W. Press I to resume

dubbing.

9 Press o on the unit, then stop playback on the audio device to

end the audio dubbing.

NOTES:

● When monitoring the audio dubbed sound on the DV deck, set

AAUDIO MODEB to ASOUND2B (A pg. 60).

● When playing back an audio dubbed Mini DV tape on the DV

deck, set AAUDIO MODEB to ASOUND2B (A pg. 60).

● Audio dubbing is not possible using the [DV IN/OUT] connector.

● Audio dubbing is not possible on a blank portion of the tape.

Audio Dubbing (DV Deck Only)

ATTENTION:

You cannot perform Audio Dubbing on a tape that was recorded

with ADV AUDIO RECB set to A16BITB (A pg. 60), on a tape that

was recorded at the ALPB speed, or on a blank tape.

AUDIO OUT

Audio cable

(not supplied)

Recorder

Mixer output

To [AUDIO]

input

Your unit

Original sound

Audio mixer

[AUDIO OUTPUT]

Recorder

Your unit

[AUDIO]

input

CD player, etc.

AUDIO DUB.INPUT SELECT

●

Slide the TV/DVD switch to DVD.

DVM600US_00.book Page 54 Monday, September 25, 2006 1:54 PM

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Comments to this Manuals

No comments

Jvc SR- DVM600U User Manual Page 54

Comments to this Manuals

Related products and manuals for Car DVR Jvc SR- DVM600U