JVC Everio GZ-MG70U User Manual download pdf (Page 52)

52 EN

MasterPage: Heading0_Left

REFERENCES

Power

No power is supplied.

● The power is not connected properly.

H Connect the AC adapter securely. (墌 pg. 14)

● The battery pack is not attached firmly.

H Detach the battery pack once again and re-attach

it firmly. (墌 pg. 14)

● The battery is dead.

H Replace the dead battery with a fully charged

one. (墌 pg. 14)

No display appears.

● When using the AC adapter, the camera enters

the sleep mode, the access lamp lights, and the

LCD monitor turns off.

H To cancel the sleep mode, perform any operation

such as zooming.

The power was turned off accidentally.

● The drop detection function operated. (墌 pg. 21)

H Set the power switch to OFF, and turn the power

on again. To turn off the drop detection function,

set [DROP DETECTION] to [OFF]. (墌 pg. 49)

Recording

Recording cannot be performed.

● [MEMORY CARD IS FULL] appears.

H Replace with new recording medium or delete

unnecessary files. (墌 pg. 19, 39)

● Recording medium is not selected properly.

H Select the recording medium. (墌 pg. 21, 48, 49)

When shooting a subject illuminated by

bright light, vertical lines appear.

● This is not a malfunction.

When the screen is under direct sunlight

during shooting, the screen becomes red or

black for an instant.

● This is not a malfunction.

During recording, the date/time does not

appear.

● [DATE/TIME] is set to [OFF].

H Set [DATE/TIME] to [ON]. (墌 pg. 49)

The LCD monitor indications blink.

● Certain modes of program AE, effect, DIS and

other functions that cannot be used together are

selected at the same time.

Digital zoom does not work.

● [ZOOM] is set to [10X] (optical zoom).

H Set [ZOOM] to [40X] or [200X]. (墌 pg. 50)

● Digital zoom is not available in the still image

recording mode.

Troubleshooting

The camera is a microcomputer-controlled

device. External noise and interference (from a

TV, a radio, etc.) might prevent it from

functioning properly.

H To solve the problem, follow the Instructions

below at first.

H If the problem is not solved, reset the

camera. (Refer to “To reset the camera”

below.)

H If the problem still exists, please consult your

nearest JVC dealer.

8 To reset the camera

A Press RESET using a piece of wire or other

such pointed instrument. The power is

turned off once and turned on again

automatically.

B If nothing happens, set the power switch to

OFF and remove the power supply (battery

pack or AC adapter) from the camera, then

put it back again.

C Execute [PRESET] from the menu. The

camera returns to it’s factory-preset.

(

墌 pg. 48)

RESET

M5E6US.book Page 52 Tuesday, September 27, 2005 5:42 PM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Comments to this Manuals

No comments

JVC Everio GZ-MG70U User Manual Page 52

Comments to this Manuals

Related products and manuals for Camcorders JVC Everio GZ-MG70U