JVC KD-S35 User Manual

Browse online or download User Manual for Car audio amplifiers JVC KD-S35. JVC KD-S35 User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
KD-S35
Installation/Connection Manual
Manual de instalación/conexión
GET0563-002A
[J]
PREPARATIONS
You need the installation kits which corresponds to your car.
Mark all the check boxes ( ) to make sure you have follow the instructions and the listed parts.
Check the battery system in your car
Prepare this before installation
1
0508DTSMDTJEIN
EN, SP
© 2008 Victor Company of Japan, Limited
ENGLISH
ESPAÑOL
12 V DC, NEGATIVE ground
The fuse blows.
* Are the red and black leads connected correctly?
Power cannot be turned on.
* Is the yellow lead connected?
No sound from the speakers.
* Is the speaker output lead short-circuited?
Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
This unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
This unit does not work at all.
* Have you reset your unit?
TROUBLESHOOTING
A/B
Hard case/
Control panel
C
Sleeve
D
Trim plate
E
Power cord
K
Handles
J
Rubber cushion
I
Mounting bolt—
M4 × 5 mm (M4 × 1/4");
M5 × 12.5 mm (M5 × 1/2")
H
Lock nut (M5)
G
Washer (ø5)
Parts list for installation and connection
L
Remote controller
M
Battery
When using the optional stay
Install the unit at an angle of
less than 30˚.
Screw (option)
Stay (option)
Fire wall
Dashboard
* Not supplied for this unit.
Flat type screws
—M5 × 8 mm (M5 × 3/8")*
Pocket
Flat type screws
—M5 × 8 mm (M5 × 3/8")*
Bracket*
Bracket*
Removing the unit
In dash-mounting
Before removing the unit, release the rear section.
When installing the unit without using the sleeve
In a Toyota car for example, first remove the car radio and install the unit in its place.
Do the required electrical
connections.
Bend the appropriate tabs
to hold the sleeve firmly
in place.
When you stand the unit, be careful
not to damage the fuse on the rear.
INSTALLATION
If you are not sure how to install this unit correctly, consult your JVC car audio dealer.
F
Direct connection
cable for iPod
Install_EN_KD-S35[J]_1.indd 1Install_EN_KD-S35[J]_1.indd 1 6/5/08 4:41:33 PM6/5/08 4:41:33 PM
Page view 0
1 2 3 4

Summary of Contents

Page 1 - INSTALLATION

KD-S35Installation/Connection ManualManual de instalación/conexiónGET0563-002A[J]PREPARATIONSYou need the installation kits which corresponds to your

Page 2 - ELECTRICAL CONNECTIONS

Set “L/O MODE” to “SUB. W” (See page 15 of the INSTRUCTIONS.)Remote lead (blue with white stripe)To the remote lead of other equipment or automatic an

Page 3 - INSTALACION

KD-S35Installation/Connection ManualManual de instalación/conexiónPREPARATIVOSUtilice los kits de instalación que correspondan a su vehículo.• Marque

Page 4 - CONEXIONES ELECTRICAS

4PúrpuraAltavoz delantero (izquierdo)Al conductor remoto de otro equipo o de la antena automática, si hubiere (máx. 200 mA)Azul con rayas blancasRojoA

Comments to this Manuals

No comments